.png)
Tribo Electric Dust Monitor
The Tribo Electric Dust Monitor is a real-time, continuous, indicative dust monitor with logging and alarm capability. It consists of a single probe for installation in a silo or duct, and a control unit or logger. This type-approved measuring device with a measuring probe is for very low to medium dust concentrations. It is ideal for thick-walled or double-walled ducts because of the one-sided installation.
The Tribo Electric Dust Monitor measurement is based on the principle of Tribo-Electric charge transfer. The electrical charge carried by dust particles is captured by a highly sensitive Tribe-Electric probe, amplified, and then transmitted to the control unit. As the current generated by the charge is proportional to the concentration of particles present, an indicative signal of dust presence results.
FEATURES :
- Dust level at which the red LED light alarm is triggered.
- The emissions level at which the audible and visual alarm is triggered.
- 4-20 mA continuous output
- Optional RS232 or 485
- Data lagging
At glance
- One-side installation
- For very low to medium dust concentrations
- Automatic check of zero and reference point
- Continuous monitoring
- For small to medium duct diameters
- High sensitivity
- Quick & easy single-point installation with no moving parts
- Low maintenance costs
- Minimum detection limit less then mg/m3
| Measuring Principle: | Tribe - Electric charge transfer |
| Measuring Range: | Dust content |
| Remark: | Other measuring range on request |
| Process temperature: | -25 to 400 Deg.C,maximum temp depends on Type |
| Process gas humidity: | Non-condensing |
| Duct Diameter: | >0.25m |
| Ambient temperature: | -15 to 50 Deg.C |
| Ambient Humidity: | 0...95% relative |
| Enclosure rating: | IP-67 |
| Analogue output: | 4-20mA, 750 ohms load impedance |
| Power Supply: | 24VDC |
| Optional Interfaces: | RS-232 or RS-485 |
| Humidity: | Non condensing. |
It is a real-time, continuous dust monitoring system that detects low to medium dust concentrations in ducts or silos using the tribo-electric principle.
The device uses tribo-electric charge transfer where dust particle charge is captured by a sensitive probe and converted to an electrical signal for indicative dust level measurement.
It’s ideal for industrial emissions monitoring, silo dust detection, and continuous particulate monitoring in ducts and process lines.
Yes — it includes audible/visual alarms, 4-20 mA continuous output, and optional RS-232/RS-485 communication for integration with control systems.
Key features include one-side probe installation, high sensitivity, low maintenance, logging capability, and continuous dust level output for industrial compliance.
Related Products
Back Scattered Dust Monitor
A Back Scattered Dust Monitor is a specialized instrument designed to
Tribo Electric Dust Monitor
A real-time continuous indicative dust monitor with logging & alarm capability.
.webp)
.webp)
.webp)
.webp)
.webp)
.webp)
